{"title":"Pegamento y adhesivos Mapei","description":null,"products":[{"product_id":"adhesivo-de-baldosas-adesilex-p22-mapei","title":"Adesilex P22 Mapei Tile Adhesive","description":"\u003cp\u003e Adesilex P22 from Mapei is a ready-to-use paste adhesive with zero vertical slip and long open time for ceramic tiles (adhesive thickness up to 5 mm)\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCHARACTERISTICS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Adesilex P22 is an adhesive in aqueous dispersion based on acrylic resin, mineral fillers with controlled granulometry and various additives.\u003c\/li\u003e\n\n\u003cli\u003e Adesilex P22 is ready to use and comes in the form of a viscous paste, easily applicable even vertically, with a particularly long open time.\u003c\/li\u003e\n\n \u003cli\u003eThe tile, once laid, adheres immediately, even vertically thanks to its excellent initial adhesion\u003c\/li\u003e\n\n\u003cli\u003e The hardening of Adesilex P22 occurs by the evaporation of the water it contains until it becomes considerably flexible and forms an excellent adhesion that resists all types of vibrations and deformations of construction materials.\u003c\/li\u003e\n\n\u003cli\u003e The water resistance of Adesilex P22, although good, is lower than that of cement-based hydraulic adhesives.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTO\u003c\/strong\u003e \u003cstrong\u003eIMPORTANT NOTICES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Do not use Adesilex P22 in the following cases:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e for outdoor or continuous immersion applications (swimming pools, tanks, etc.);\u003c\/li\u003e\n\n\u003cli\u003e on metal supports;\u003c\/li\u003e\n\n\u003cli\u003e for laying non-absorbent ceramic tiles on non-absorbent supports;\u003c\/li\u003e\n\n\u003cli\u003e for laying natural stone, especially if they are calcareous in nature with a faint color (e.g. Carrara marble).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e In this case, use the specific product from the Mapei range.\u003c\/p\u003e\n\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFIELDS OF APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Interior adhesion of ceramic tiles and mosaics of all types on walls, ceilings and also on deformable supports.\u003c\/li\u003e\n\n\u003cli\u003e Point adhesion of insulating materials such as expanded polystyrene and polyurethane, rock and glass wool, eraclit, expanded cement elements, sound-absorbing panels, etc.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eSome application examples\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Absorbent tiles on concrete walls, prefabricated or made on site.\u003c\/li\u003e\n\n\u003cli\u003e Tiles on plaster plaster, sprayed plaster, prefabricated plaster panels.\u003c\/li\u003e\n\n\u003cli\u003e Tiles on walls in laminated plaster (plasterboard).\u003c\/li\u003e\n\n\u003cli\u003e Tiles on painted walls.\u003c\/li\u003e\n\n\u003cli\u003e Absorbent tiles over old tiles.\u003c\/li\u003e\n\n\u003cli\u003e Large format tiles on walls.\u003c\/li\u003e\n\n\u003cli\u003e Assembly of insulating panels on plaster.\u003c\/li\u003e\n\n\u003cli\u003e Installation of expanded polystyrene ceilings.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eAdhesion of insulating materials\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Spot placement of foam materials: 0.5-0.8 kg\/m2\u003c\/li\u003e\n\n \u003cli\u003ePlacement of foam-cement elements: 1.5 kg\/m2\u003c\/li\u003e\n\n\u003cli\u003e Installation on rough surfaces 2.5 kg\/m2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCOLOR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e White\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003ePRESENTATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e 5kg jar\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":44828073787566,"sku":"060176","price":16.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6167\/7486\/products\/11901.jpg?v=1710835607"},{"product_id":"adhesivo-epoxi-eporip-mapei","title":"Eporip Mapei Epoxy Adhesive","description":"\u003cp\u003e Eporip from the Mapei brand is a solvent-free epoxy adhesive, consisting of two pre-dosed components (component A = resin and component B = hardener) that must be mixed together before use.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCHARACTERISTICS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Eporip has the consistency of a slightly thixotropic paste that can be applied with a brush on both horizontal and vertical surfaces.\u003c\/li\u003e\n\n\u003cli\u003e Eporip polymerizes without shrinkage and, once hardening is completed, it is impermeable to water, has optimal dielectric properties and high mechanical characteristics, as well as adhesion to concrete and steel.\u003c\/li\u003e\n\n \u003cli\u003eEporip responds to the principles defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and to the minimum requirements required by EN 1504-4 (“Structural gluing”)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTO\u003c\/strong\u003e \u003cstrong\u003eIMPORTANT NOTICES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Do not apply Eporip with temperatures below +5° C\u003c\/li\u003e\n\n\u003cli\u003e Do not apply Eporip on wet surfaces (although it tolerates slight humidity)\u003c\/li\u003e\n\n\u003cli\u003e Do not pour fresh concrete over hardened Eporip\u003c\/li\u003e\n\n\u003cli\u003e Do not apply Eporip on dusty, friable or inconsistent supports.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFIELDS OF APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Creation of monolithic work joints between fresh concrete and hardened concrete\u003c\/li\u003e\n\n\u003cli\u003e Gluing precast concrete elements\u003c\/li\u003e\n\n\u003cli\u003e Mixed concrete-steel gluing\u003c\/li\u003e\n\n\u003cli\u003e Filling cracks in concrete\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eSome application examples\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n \u003cli\u003eUnion bridge in structural reinforcements of beams and pillars\u003c\/li\u003e\n\n\u003cli\u003e Union bridge over degraded industrial pavements\u003c\/li\u003e\n\n\u003cli\u003e Union bridge in waterproof rigid joints (for example, tank foundation slab-wall)\u003c\/li\u003e\n\n\u003cli\u003e Reinforcement of beams using the metal cladding technique\u003c\/li\u003e\n\n\u003cli\u003e Sealing fissures or cracks in cementitious screeds\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCONSUMPTION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Consumption varies depending on the irregularities present in the support and the method used for its application.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e Indicatively:\u003c\/p\u003e\n\n\u003cp\u003e – connecting bridge on a rough support: 0.5 ÷ 0.7 kg\/m²;\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e – connecting bridge on very irregular supports: 1.0 ÷ 2.0 kg\/m²;\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e – crack sealing: 1.35 kg\/l of cavity to be filled;\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n \u003cp\u003e– gluing prefabricated concrete elements\u003c\/p\u003e\n\n\u003cp\u003e or concrete-steel: 1.35 kg\/m² per mm of thickness.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCOLOR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Component A: Gray\u003c\/li\u003e\n\n\u003cli\u003e Component B: White\u003c\/li\u003e\n\n\u003cli\u003e Mixed: gray\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePRESENTATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Lot of 10 kg (component A: 7.5 kg. + component B: 2.5 kg)\u003c\/li\u003e\n\n\u003cli\u003e 2 kg batch (component A: 1.5 kg + component B: 0.5 kg)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"2kg","offer_id":44828187984046,"sku":"060156","price":40.0,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":44828188016814,"sku":"0601561","price":267.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6167\/7486\/products\/23940.jpg?v=1710838225"},{"product_id":"adhesivo-para-ceramica-keralastic-t-mapei","title":"Keralastic T Mapei Ceramic Adhesive","description":"\u003cp\u003e Keralastic T is a two-component adhesive free of solvent and water, elastic and waterproof, consisting of a polyurethane base (component A) and a special hardener (component B).\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCHARACTERISTICS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e By mixing the two components together, a paste with the following characteristics is obtained:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Easy workability\u003c\/li\u003e\n\n\u003cli\u003e Optimal durability and resistance to aging\u003c\/li\u003e\n\n\u003cli\u003e Perfect adhesion on all supports used in construction\u003c\/li\u003e\n\n\u003cli\u003e Hardens through a chemical reaction without shrinkage, until it assumes a notable resistance\u003c\/li\u003e\n\n\u003cli\u003e High elasticity\u003c\/li\u003e\n\n\u003cli\u003e In the case of Keralastic T, high thixotropy: it can be applied vertically without casting and without letting the tiles loose, even of heavy weight and format. The resistance to vertical slipping complies with EN 1308.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n \u003cp\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Do not place on very humid surfaces or where there is fear of rising humidity due to capillarity.\u003c\/li\u003e\n\n\u003cli\u003e The containers are pre-dosed to avoid mixing errors. Do not try to use portions of the product by mixing the two components by eye: an incorrect mixing ratio affects the hardening capacity.\u003c\/li\u003e\n\n\u003cli\u003e Use the products at temperatures between +10º C and +30º C\u003c\/li\u003e\n\n\u003cli\u003e In the case of using the products on surfaces exposed to continuous immersion in water, consult the MAPEI Technical Service beforehand.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFIELDS OF APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Gluing on walls and floors, exterior and interior, of ceramic tiles, stone material and mosaic of any type on:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Screeds, plasters, concrete, asphalt, wood, metal, PVC, reinforced polyester, fiber cement, plaster, plasterboard, prefabricated gypsum panels, etc.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eSome application examples\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n \u003cli\u003eGluing ceramic tiles, stone material and mosaic of any type, in showers and laminates used in prefabricated bathrooms\u003c\/li\u003e\n\n\u003cli\u003e Gluing ceramic and mosaic on wooden work surfaces or kitchens and their waterproofing\u003c\/li\u003e\n\n\u003cli\u003e Bonding ceramics, stone materials and mosaics on balconies, outdoor terraces, flat roofs or domes\u003c\/li\u003e\n\n\u003cli\u003e Bonding of natural stones and recomposed materials (marble of any type, Verde Alpi, Ardesita, etc.), also subject to movements and dimensional variations due to water absorption (class C of dimensional stability according to the MAPEI standard)\u003c\/li\u003e\n\n\u003cli\u003e Bonding ceramics and stone materials on supports subject to strong vibrations and deformations\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKeralastic T setting time as a function of temperature\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Temperature in °C 30 25 20 15 10\u003c\/p\u003e\n\n \u003cp\u003eTime in hours 2 3 6 8 20\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCONSUMPTION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eBonding of ceramics and stone materials:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e mosaic and small formats\u003c\/p\u003e\n\n\u003cp\u003e (flat no. 4): 2.5 kg\/m2;\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e normal formats\u003c\/p\u003e\n\n\u003cp\u003e (trowel no. 5): 3.5 kg\/m2;\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e large formats, marbles,\u003c\/p\u003e\n\n\u003cp\u003e stones (double glued): 5 kg\/m2\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCOLOR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Component A: White-gray\u003c\/li\u003e\n\n\u003cli\u003e Component B: transparent (Liquid)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePRESENTATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Jar of 10 kg total (9.4 kg comp. A + 0.6 kg comp. B)\u003c\/li\u003e\n\n\u003cli\u003e Jar of 5 kg total (4.7 kg comp. A + 0.3 kg comp. B)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"5kg","offer_id":44828501541038,"sku":"060180","price":79.5,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":44828501573806,"sku":"0601801","price":125.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6167\/7486\/products\/11921.jpg?v=1710845720"},{"product_id":"cartucho-ultrabond-ms-rapid-mapei","title":"Mapei Ultrabond MS Rapid Cartridge","description":"\u003cp\u003eMapei's Ultrabond MS Rapid is a high-viscosity and thixotropy adhesive, based on polymers modified with silanes and, therefore, free of silicones and isocyanates, developed in MAPEI's R\u0026amp;D Laboratories.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCHARACTERISTICS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Regarding polyurethane formulations, Ultrabond MS Rapid guarantees:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e compatibility even with wet substrates\u003c\/li\u003e\n\n\u003cli\u003e greater ease of extrusion, especially at low ambient temperatures\u003c\/li\u003e\n\n\u003cli\u003e faster surface hardening\u003c\/li\u003e\n\n\u003cli\u003e longer shelf life\u003c\/li\u003e\n\n\u003cli\u003e the use of traditional plastic cartridges\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e Regarding neutral silicone formulations, Ultrabond MS Rapid offers:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e better adhesion to construction supports, both compact and absorbent\u003c\/li\u003e\n\n\u003cli\u003e greater initial “suction effect”\u003c\/li\u003e\n\n\u003cli\u003e absence of “product thread” at the end of extrusion\u003c\/li\u003e\n\n\u003cli\u003e greater mechanical resistance to traction and shear\u003c\/li\u003e\n\n\u003cli\u003e Possibility of painting with elastomeric paints commonly used in construction\u003c\/li\u003e\n\n \u003cli\u003eabsence of migration of plasticizers and the consequent contamination of the support\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eIMPORTANT NOTICES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Do not use on dusty or friable surfaces\u003c\/li\u003e\n\n\u003cli\u003e Do not apply on wet surfaces or surfaces exposed to rising humidity.\u003c\/li\u003e\n\n\u003cli\u003e Do not use on surfaces dirty with oil, grease or release agents.\u003c\/li\u003e\n\n\u003cli\u003e Do not use on bituminous surfaces\u003c\/li\u003e\n\n\u003cli\u003e Do not apply Ultrabond MS Rapid at temperatures below +5° C\u003c\/li\u003e\n\n\u003cli\u003e Proceed to gluing the elements right after extruding the adhesive, avoiding unnecessary waits.\u003c\/li\u003e\n\n\u003cli\u003e Avoid contaminating the fresh product with alcoholic solvents\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFIELDS OF APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Ultrabond MS Rapid is a deformable adhesive with a high elastic modulus, one-component, thixotropic, based on silane-modified polymers, which is characterized by a high initial grip (“suction effect”) and a rapid final hardening.\u003c\/li\u003e\n\n \u003cli\u003eIt is recommended, therefore, as an adhesive for gluing that requires, in a short time, a strong initial grip and a high final mechanical resistance.\u003c\/li\u003e\n\n\u003cli\u003e Compatibility with most construction materials, both absorbent and non-absorbent, even wet, and its rapid polymerization, allow Ultrabond MS Rapid to be used easily and practically in the construction and assembly of construction and industrial components and finishes, in replacement or as a complement to traditional mechanical fixings\u003c\/li\u003e\n\n\u003cli\u003e Suitable for gluing, indoors and outdoors, parapets, stone lintels, skirting boards, parquet, wooden or plastic cable covers, thermal and acoustic insulating panels, curved ceramic tiles, wall and door coverings, cladding plates and prefabricated elements\u003c\/li\u003e\n\n \u003cli\u003eFurthermore, specific for the installation of Idrostop Soft, a hydro-expansive bentonite joint, for the waterproofing of concreting joints and the sealing of bodies passing through concrete elements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eSome application examples\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Indicated for gluing and assembly of a multitude of materials, such as:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Cement and derivatives\u003c\/li\u003e\n\n\u003cli\u003e Brick\u003c\/li\u003e\n\n\u003cli\u003e Stone\u003c\/li\u003e\n\n\u003cli\u003e Wood and derivatives\u003c\/li\u003e\n\n\u003cli\u003e Metals\u003c\/li\u003e\n\n\u003cli\u003e Prepainted surfaces in general\u003c\/li\u003e\n\n\u003cli\u003e Ceramics\u003c\/li\u003e\n\n\u003cli\u003e Glass\u003c\/li\u003e\n\n\u003cli\u003e Rigid and flexible plastic materials*\u003c\/li\u003e\n\n\u003cli\u003e Idrostop Soft, hydroexpansive bentonite joint\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCONSUMPTION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Depending on the gluing method used (dots or beads)\u003c\/li\u003e\n\n\u003cli\u003e As an indication, a 300 ml cartridge covers 5 linear meters of adhesive cord with triangular section 10 x 10 mm (base x height)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCOLOR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e White\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003ePRESENTATION\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e 300ml cartridge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":44829383688366,"sku":"060170","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6167\/7486\/products\/6283.jpg?v=1710874435"}],"url":"https:\/\/no.brikum.com\/collections\/pegamento-y-adhesivos-mapei.oembed","provider":"Brikum","version":"1.0","type":"link"}