Descripción
The fixed skylight does not have any opening system, it allows the entry of natural light with the consequent energy savings, it is used as a natural lighting system.
CHARACTERISTICS
PVC socket
- The plinth is the support that is placed on the ceiling and serves as support for the dome.
- Made entirely of PVC, with an interior air chamber that provides greater thermal insulation.
- The exterior part is rough to facilitate the grip of the waterproofing.
- The white PVC interior is smooth and gives it a perfect finish.
- Height 15 cm.
Domes
The dome is the upper part of the skylight, spherical or pyramidal in shape, which allows the entry of light and proper evacuation of water.
Made of methacrylate (polymethylmethacrylate PMMA), transparent, do not yellow and maintain their transparency for years.
Bivalve dome
We call the union of two domes that form an intermediate air chamber a bivalve dome. It is indicated to prevent condensation that occurs in extreme humidity and temperature conditions. It also guarantees greater thermal insulation, which will allow us to significantly save energy.
Due to extreme weather conditions on roofs, it is advisable to always install bivalve dome skylights.
To achieve greater light entry, the inner dome is made transparent. The outside is also transparent
|
ZH (A x B) |
CL (C x D) |
CB (E x F) |
ZB (G x H) |
h |
Illuminated surface m² |
|
40x40 |
19.7x19.7 |
31.5x31.5 |
52x52 |
7 |
0.04 |
|
50x50 |
29.7x29.7 |
41.5x41.5 |
62x62 |
8.5 |
0.08 |
|
60x60 |
39.7x39.7 |
51.5x51.5 |
72x72 |
10 |
0.16 |
|
70x70 |
51.5x51.5 |
61x61 |
82x82 |
12 |
0.27 |
|
80x80 |
59x59 |
73.2x73.2 |
92x92 |
13.4 |
0.35 |
|
90x90 |
70.5x70.5 |
82x82 |
102x102 |
15.8 |
0.50 |
|
100x100 |
79.2 x 79 x.2 |
92.4x92.4 |
112x112 |
18.3 |
0.63 |
|
120x120 |
99x99 |
111.5x111.5 |
132x132 |
21.5 |
0.98 |
MOUNTING
Skylights are the ideal solution to install on flat roofs to provide light, ventilation, access to the roof or as smoke evacuation mechanisms.
They can also be installed on sloping roofs.
Assembly of the skylights is simple and quick.
Before making the work opening, confirm the measurements of the skylight. We advise having the skylights before starting the work in order to correctly adjust all the dimensions.
Do not seal the domes with silicone
1 · Present the plinth over the gap in the slab.
2 · Fix the plinth to the cover with screws (not included).
3 · Cover the entire exterior part of the socket with waterproof film. 
4 · Present the dome on the plinth, center and mark the holes in the plinth and remove the dome. Drill the socket with a 5 mm iron drill bit.
5 · Mount the dome on the plinth, without overtightening the screws to avoid the risk of breaking the dome or nullifying the effect of the expansion washer.
