Descripción
Due to the fact that in screwed joint work the assembly spaces are increasingly narrow, it is necessary that users have tools with which they can also work successfully in these situations. In tight environments additional points are needed at which the tool can be repositioned. So, will it be possible to modify the open-end wrenches in such a way that increases the possibilities of repositioning the tool? Through the combination of the mouth that is rotated at an angle of 7.5° and the geometry of the double hexagon, a doubling of the positioning points of the tool when screwing is achieved.
By repeatedly rotating the wrench 180° along its longitudinal axis during the screwing action, four possibilities are given, and thus the nuts and screws can be actuated every 15°. In this way, the Joker 6003 with its ingenious mouth geometry expands the spectrum of applications in narrow spaces in an important way.
The Joker 6003 practically finds the corresponding positioning point autonomously after each turn of the tool. The annular side is thin but nevertheless very robust and is bent at an angle of 15° in relation to the axis of the tool.
The high-quality surface finish ensures effective and long-lasting anti-corrosion protection. Take the "Take it easy" tool search system: with color markings according to size.
The Joker bags have a self-adhesive adhesion system on the back side so that they can be easily placed on the wall, shelf or tool cart in the workshop, or to connect them with the Wera 2go transport system.
CHARACTERISTICS
- Particularly suitable for very narrow mounting spaces
- Special mouth geometry expands tool positioning possibilities
- The minimum angle of return inside the mouth "grabs" the screw every 15º
- The annular side is thin and bent at an angle of 15º
- Suitable for connection to the Wera 2go system
INCLUDES
6003 Joker:
-
x1 8x115mm
-
x1 10x125mm
-
x1 11x135mm
-
x1 12x148mm
-
x1 13x160mm
-
x1 14x167mm
-
x1 15x174mm
-
x1 16x182mm
-
x1 17x190mm
-
x1 18x210mm
-
x1 19x230mm